Connecteur MPO
MTP stands for “Multi-fiber Termination Push-on” connector and it is designed by USConec and built around the MT ferrule. MTP connector is a high performance MPO connector designated for better mechanical and optical performance and is in complete compliance with all MPO connector standards.
Features and Benefits:- High Performance in IL & RL
- Available in 8,12 and 24 fiber
- Precise dimension
- 100% in-house tested
- Customized furcation length to cater for different installation situations
- Single-fiber connector interface available in SC & LC in forms of Simplex or Duplex channel
- Support higher speed Ethernet and Fiber Channel applications (OM3, OM4 and SM fibers)
- Gigabit Ethernet
- CATV and Multimedia
- Active Device Interface
- Premise installations
- Optical Switch interframe connections
- Interconnection for O/E modules
- Telecommunication Networks
- Industrial & Medical
- IEC Standard 61754-7
- TIA/EIA 604-5 Type MPO Structured cabling per TIA-568-C Parallel Optics
- Optical Internetworking Forum (OIF) Compliant InfiniBand Compliant
- 10G Fiber Channel Compliant
- 40G and 100G IEEE 802.3 SNAP 12
- POP 4
- QSFP
| Ordering Information | Description | Part Number | ||
| MPO Fiber Optic Connector | OXIN-FAC-MPXXXX | |||
| Optical Specifications
|
Parameter | Value | ||
| MTP Standard | MTP ELITE | |||
| Insertion Loss | MM | 0.20 dB Typical (All Fibers) 0.60 dB Maximum (Single Fiber)2,3 | 0.10 dB Typical (All Fibers) 0.35dB Maximum (Single Fiber)2,3 | |
| SM | 0.25 dB Typical (All Fibers) 0.75 dB Maximum (Single Fiber)1 | 0.10 dB Typical (All Fibers) 0.35 dB Maximum (Single Fiber)1,4 | ||
| MTP Standard | MTP ELITE | |||
| Optical Return Loss | MM | > 20dB | > 20dB | |
| SM | > 60dB (8° Angle Polish) | > 60dB (8° Angle Polish) | ||
| Physical Specifications | Parameter | Value | ||
| MM | SM | |||
| Operating temperature | – 40°C to + 80°C | – 40°C to + 80°C | ||
| Durability | < 0.2 dB change (per EIA-455-21A) 1000 remates | < 0.3 dB change (per EIA-455-21A) 500 remates | ||
