Soudeuse OFS-55S
Oxin Fusion Splicer OFS-55S is a mini type fusion splicing machine and have our own intellectual property right of fiber adjustment technology. It adopts advanced PAS Fiber adjustment technology. Adopt four motors drive, have fiber adjustment function, it is not only used for FTTX project, but also can be used for the trunk line, it is a machine which is the smallest volume, the lightest weight, the most fast splicing speed.
Features and Benefits:- Based on the principle of PAS (Lateral Projection System), adopt advanced image detection algorithm
- Double core align structure, higher success rate of fusion and lower loss
- Adopt 4.3 inches 16:9 TFT colorized LCD screen
- Fast: 9s fast splicing , 27s fast heating
- Splice Loss Evaluation
- Typical heating time: 35sec (FP-03 60mm)
- Interchangeable fiber holders for 0.25, 0.9 mm fibers
- Reliability design, strengthen, shockproof, dustproof, waterproof with rubber protection function
- Low power consumption design
- Device components, spare parts and materials used meet corrosion requirements, fluid contamination from erosion
- Multi-functional, small-sized, portable, can greatly improve working efficiency
- Detect the air pressure, temperature and humidity and other environmental factors and calibrate arc automatically
- Fiber optic network installation
- Fiber connector installation
- Optoelectronic device manufacturing
| Ordering Information | Description | Part Number |
| Fusion Splicer | OFS-55S | |
| Packaging | Description | |
| Cardboard box, 1 unit per box | ||
| Technical Characteristics | Parameter | Value |
| Applicable fiber type | SM, MM, DS, NZDS | |
| Applicable fiber count | Single | |
| Applicable fiber diameter | Cladding diameter of 125μm Coating diameter 250 ~ 900μm | |
| Cleaved length | Coating diameter < 0.25mm : 8-16mm Coating diameter > 0.25mm : 16mm minimum | |
| Average splice loss | 0.02dB (SM), 0.01dB (MM) 0.04dB (DS), 0.04dB (NZDS) | |
| Splicing time | 9 sec (typical time) | |
| Heating time | 27s (typical time) | |
| Protection sleeve | 40mm, 60mm | |
| Splice storage | 5,000 | |
| Optical magnification | X / Y: 115 times, X, or Y: 230 times | |
| Splice/Heat program | Stored 40 groups, 80 groups of user-defined | |
| Return loss | ≥ 60dB | |
| Electrode lifespan | 2,500 arcs | |
| Tensile test | 2N | |
| Data interface | USB 2.0 | |
| Power supply | 11.1V lithium battery, 13.5V/5A power adapter | |
| Battery | Typical operating 220 (splice / heat shrink) on a single charge 3h, can be reused 500 times | |
| Physical Characteristics | Parameter | Value |
| Dimensions | 160 mm x 145 mm x 130 mm | |
| Weight | 1.6 Kg (without battery) 1.9 Kg (with battery) | |
| Mechanical Characteristics | Parameter | Value |
| Operating temperature | -22 ~ 55°C | |
| Storage temperature | -40 ~ 80°C (except battery), -10 ~ 80°C (battery) | |
| Relative humidity | ≤ 95% | |
| Altitude | 0 ~ 4000m | |
| Wind Protection | ≤ 15m/s | |
