Analyseur de transmission de données ETA-801
Oxin Data Transmission Analyzer, ETA-801, the latest tester developed by Oxin Group, is an expert tool for daily maintenance, troubleshooting and equipment installation, especially for E1 circuits and frame relay services of important applications. It can be for E1 in-service monitoring as well as BER testing from 50b/s to 2048kb/s with supported interfaces. It also supports E1 jitter TX/RX testing, E1 synchronous clock testing and frame relay testing.
Features and Benefits:- 480x272 4.3” Color TFT LCD with touch screen
- Dual E1 testing
- Perform the remote control set through Ethernet
- Large capacity Li-ion battery guarantees 8 hours operation
- Large capacity data storage, 10,000 records
- Remote loopback testing
- End-to-end testing
- In-service monitoring
- E1 pulse mask
- Pass through mode
- V series interfaces testing
- Jitter testing
- Voice and frequency testing
- Frame relay testing
| Ordering Information | Description | Part Number |
| Data Transmission Analyzer | ETA-801 | |
| Packaging | Description | |
| Cardboard box, 1 unit per box | ||
| Technical Characteristics | Parameter | Value |
| Internal clock | 2048KHz±10ppm | |
| Signal code | HDB3 / AMI | |
| Signal interface | ITU-T G.703 | |
| Test pattern | PRBS 2n-1 (n=6, 9, 11, 15, 20, 23) | |
| Tx | BNC 75Ω unbalanced, RJ48 120 Ω balanced | |
| Rx | BNC 75Ω unbalanced / high impedance>2KΩ RJ48 120Ω balanced / high impedance>2KΩ | |
| Interfaces | RJ45 port, USB port | |
| Data storage | 10,000 records | |
| Power supply | 4.4Ah Lithium battery (continuing working 8 h) | |
| Physical Characteristics | Parameter | Value |
| Dimensions | 210 mm x 110 mm x 60 mm | |
| Weight | 1.2 Kg | |
| Mechanical Characteristics | Parameter | Value |
| Operating temperature | 0 ~ 50°C | |
| Storage temperature | -20 ~ 70°C | |
| Relative humidity | 10 ~ 90% | |
| Functions | Test | Function |
| G.703 E1 testing | Out of service testing and in-service monitoring | |
| Dual E1 in-service monitoring | ||
| Alarm generation and error insertion | ||
| Performance analysis according to ITU-T recommendation | ||
| Pattern slips analysis | ||
| Clock slips analysis | ||
| Clock frequency offset testing | ||
| Nx64K testing | ||
| Frame setting and analysis | ||
| PCM, time slot detection | ||
| PING testing | IP address setting | |
| Ethernet connectivity testing | ||
| V series interfaces testing | V.24/RS232, V.35, V.36/RS449, X.21, EIA-530/530A and RS485/RS422 interface BER testing | |
| Performance analysis according to ITU-T recommendation | ||
| Frame relay testing (optional) | Support E1 and V.35 port | |
| Support PPP/HDLC protocol | ||
| G.703 T1 testing (optional) |
